- Home
- Products
- Laboratory technology
- Large-capacity laboratory glasswashers
- PLW 8615 [EL/S CT]
Back to Large-capacity laboratory glasswashers

PLW 8615 [EL/S CT]
Lab washer, steam/electrically heated – single door with combi tank, 900 mm wide, 351 l usable capacity.
- Capacity/cycle, e.g.216 laboratory flasks, 588vials or 294pipettes
- Flexible use of the combi tank as a recycling/pre-heating tank
- Flexible and simple – modular load carriers & EasyLoad system
- Up to 60 % less water consumption based on the load *
- Efficient – strong pump power with the variable-speed pump
- Reliable results – spray arm monitoring and conductivity meter
Voltage:
3N AC 400V 50HZ 32-35 A
Product benefits
Smart two-pump technology Only from Miele Professional: two-pump technology with variable-speed pump. Combi tank Reduces cycle times and saves resources. Conductivity monitoring Reliably clean: Residue-free final rinse for perfect results. Spray arm monitoring Reliable cleaning performance thanks to the monitoring of the rotation speed of the spray arm. Modular load carriers Load carriers can be flexibly adapted to the load items depending on need or application. EasyLoad system* The new EasyLoad system simplifies the loading of baskets and protects laboratory glassware during reprocessing. Programmable controls According to requirements: programmable controls enable perfect adaptation to suit individual needs. Status display via chamber lighting Convenient: changing chamber lighting colours indicate the programme phase status. Innovative cleaning programme Optimum cleaning results and value retention thanks to innovative cleaning programmes for over 50 years. Integrated hot-air drying All reprocessing items are dried efficiently using hot air filtered with a HEPA filter. Drying unit Reliable reprocessing results achieved more quickly with hot air drying. Ethernet interface The Ethernet interface enables cable-supported communication in the local network. USB interface Easy access to Miele Service: firmware updates can be performed via USB stick in order to save time. Smart two-pump technology Only from Miele Professional: two-pump technology with variable-speed pump. Combi tank Reduces cycle times and saves resources. Can use existing load carriers You can continue to use any Miele lab washer load carriers that you already have. Heater elements outside the wash cabinet A plus for hygiene: The heating elements are installed outside the wash cabinet. Easy-to-service construction Short service times thanks to maintenance-optimised appliance design. Conductivity monitoring Reliably clean: Residue-free final rinse for perfect results. Spray arm monitoring Reliable cleaning performance thanks to the monitoring of the rotation speed of the spray arm. HEPA filters Protection against contamination thanks to particle-free drying air. Integrated printer For paper-supported documentation, the integrated printer produces a comprehensive report on the process. Process documentation Safety through the clear documentation of all the reprocessing steps. Modular load carriers Load carriers can be flexibly adapted to the load items depending on need or application. EasyLoad system* The new EasyLoad system simplifies the loading of baskets and protects laboratory glassware during reprocessing. Programmable controls According to requirements: programmable controls enable perfect adaptation to suit individual needs. Status display via chamber lighting Convenient: changing chamber lighting colours indicate the programme phase status. Clear text display Everything at a glance: The display shows everything as clear text in the country-specific language. Setting options for media canisters Neat and tidy: The storage unit for liquid media. Maximum user convenience Nice and easy: the latest touch controls make the appliance easy and intuitive to use. Central dispensing For users with a high throughput the machines can be simply connected to a central dispensing system.
Product benefits
- Highlights
- Cleaning results
- Connectivity
- Efficiency
- Quality
- Safety
- User convenience
Highlights
Cleaning results
Connectivity
Efficiency
Quality
Safety
User convenience

Exclusive to Miele
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Product details
PLW 8615 [EL/S CT]
EAN 4002516145042 / Article number 62861504GB / Material number 11175200
| Construction type | Freestanding, 1 glass vertical sliding doori |
| Range | PerformanceLine |
| Type of heating | Steam/Electric convertible |
| Front/back | Stainless Steel |
| Side panels | Stainless steel |
| Single/multiple installations | |
| Loading with mobile units | |
| Electric door lock | |
| Buzzer, acoustic signal at end of programme | |
| Service-friendly design |
- Construction type
- Freestanding, 1 glass vertical sliding doori
- Range
- PerformanceLine
- Type of heating
- Steam/Electric convertible
- Front/back
- Stainless Steel
- Side panels
- Stainless steel
- Single/multiple installations
- Loading with mobile units
- Electric door lock
- Buzzer, acoustic signal at end of programme
- Service-friendly design
| Narrow-necked glassware per cycle [number] | 216 |
| Test tubes per cycle [number] | 588 |
| Laboratory flasks per cycle [number] | 216 |
| Pipettes per cycle [number] | 294 |
| Maximum load in kg | 150 |
- Narrow-necked glassware per cycle [number]
- 216
- Test tubes per cycle [number]
- 588
- Laboratory flasks per cycle [number]
- 216
- Pipettes per cycle [number]
- 294
- Maximum load in kg
- 150
| Circulation pump, Qmax in l/min | 400 |
| Additional circulation pump for load carrier – direct coupling, Qmax in l/min | 600 |
| Variable-speed pump | |
| Wash cabinet usable capacity in l | 351 |
| Tested operating hoursi | 15000 |
| Service life in wash cycles | 20000 |
| Control type | PST 20 |
| Programme selection | Full-touch colour display |
| Programmability | programmable |
| Programmes [number] | 30 |
| Free programme positions [number] | 170 |
| Automatic programme restart | |
| Time left display | |
| Programme sequence display | |
| Status display via chamber lighting | |
| Selectable display languages |
| Electrical connection | 3N AC 400V 50HZ |
| Heater rating in kW | 18 |
| Total rated load in kW | 20 |
| Fuse rating in A | 32-35 |
- Electrical connection
- 3N AC 400V 50HZ
- Heater rating in kW
- 18
- Total rated load in kW
- 20
- Fuse rating in A
- 32-35
| Electrical connection | 3N AC 400V 50HZ |
| Total rated load in kW | 10 |
| Fuse rating in A | 20 |
- Electrical connection
- 3N AC 400V 50HZ
- Total rated load in kW
- 10
- Fuse rating in A
- 20
| Compressed air connection, technical [number] | 1 |
| Required compressed air, technical, in kPa | 600-800 |
- Compressed air connection, technical [number]
- 1
- Required compressed air, technical, in kPa
- 600-800
| Drying unit heating type | Electricity |
| Air throughput in m³/h | 250 |
| Temperature setting in 1 °C increments | 60-115 |
| Time setting in 1-minute increments | 1-240 |
| HEPA filter class | H13 |
| HEPA filter filtration efficiency (DIN EN 1822) in % | 99.95 |
| HEPA filter service life in h | 1000 |
| Electric heater rating in kW | 8 |
- Drying unit heating type
- Electricity
- Air throughput in m³/h
- 250
- Temperature setting in 1 °C increments
- 60-115
- Time setting in 1-minute increments
- 1-240
- HEPA filter class
- H13
- HEPA filter filtration efficiency (DIN EN 1822) in %
- 99.95
- HEPA filter service life in h
- 1000
- Electric heater rating in kW
- 8
| External dimensions, net height in mm | 1670 |
| External dimensions, net width in mm | 900 |
| External dimensions, net depth in mm | 990 |
| External dimensions incl. plinth/floor tray and top-box panelling, height in mm | 2495 |
| External dimensions, gross height in mmi | 1960 |
| External dimensions, gross width in mmi | 1000 |
| External dimensions, gross depth in mmi | 1130 |
| Wash cabinet, height in mm | 675 |
| Wash cabinet, width in mm | 650 |
| Wash cabinet, depth in mm | 800 |
| Rack height above floor in mm | 850 |
| Net weight in kg | 391 |
| Gross weight in kgi | 402 |
| Maximum floor load in N/m²i | 8000 |
- External dimensions, net height in mm
- 1670
- External dimensions, net width in mm
- 900
- External dimensions, net depth in mm
- 990
- External dimensions incl. plinth/floor tray and top-box panelling, height in mm
- 2495
- External dimensions, gross height in mmi
- 1960
- External dimensions, gross width in mmi
- 1000
- External dimensions, gross depth in mmi
- 1130
- Wash cabinet, height in mm
- 675
- Wash cabinet, width in mm
- 650
- Wash cabinet, depth in mm
- 800
- Rack height above floor in mm
- 850
- Net weight in kg
- 391
- Gross weight in kgi
- 402
- Maximum floor load in N/m²i
- 8000
| 2 integrated diaphragm dispenser pumps for liquid media | |
| Additional integrated dispenser pumps | 4 |
| Combi tank | |
| Steam condenser (optional) | |
| Volume flow control | |
| Spray arm monitoring | |
| Conductivity monitoring | |
| Interface for process documentation | |
| Multi-component filter system | |
| Micro-fine filter | |
| Load carrier – direct coupling | |
| Integrated hot air drying (optional) | |
| Integrated printer for process documentation (optional) | |
| Heater elements outside wash cabinet | |
| EasyLoad | |
| Setting options for process chemicals (4 x 5 l or 2 x 5 l + 1 x 10 l) | |
| Wash cabinet made from high-quality stainless steel (1.4404/316L) | |
| Plinth, on wheels (optional) | |
| Drain water cooling (optional) | |
| Multi-coloured chamber lighting | |
| Modular basket design | |
| Option of using existing load carriers |
- 2 integrated diaphragm dispenser pumps for liquid media
- Additional integrated dispenser pumps
- 4
- Combi tank
- Steam condenser (optional)
- Volume flow control
- Spray arm monitoring
- Conductivity monitoring
- Interface for process documentation
- Multi-component filter system
- Micro-fine filter
- Load carrier – direct coupling
- Integrated hot air drying (optional)
- Integrated printer for process documentation (optional)
- Heater elements outside wash cabinet
- EasyLoad
- Setting options for process chemicals (4 x 5 l or 2 x 5 l + 1 x 10 l)
- Wash cabinet made from high-quality stainless steel (1.4404/316L)
- Plinth, on wheels (optional)
- Drain water cooling (optional)
- Multi-coloured chamber lighting
- Modular basket design
- Option of using existing load carriers
| CE | |
| VDE (electrical safety) | |
| EN 61010-2-040 | |
| Machinery Directive 2006/42/EC |
- CE
- VDE (electrical safety)
- EN 61010-2-040
- Machinery Directive 2006/42/EC
Additional accessories and consumables
Find additional accessories and consumables to go with this product

Additional accessories for laboratory technology
Find here the accessories that can be bought additionally for this product.
Service & Support
Call our experts.
If you have any questions or need further information please contact us on 0845 365 6608*
*Free of charge
Request individual consultation appointment
Request your personal consultation appointment for an individual planning.
Request spare parts
Do you need spare parts for your products? Please feel free to contact us!
Service and maintenance contracts
Inspection, maintenance and service contribute to preserving the value of your equipment and thus to safeguarding your investment. We offer the right solution for every need and are happy to answer further questions about service and maintenance contracts.
Notes & sources
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.


